FCS3

DASMA 108

Standard method for testing sectional garage doors and rolling door – determination of structural performance under uniform static air pressure difference. Standard method for testing sectional garage doors and rolling doors – determination of structural performance under missile impact and cyclic wind pressure

DASMA 115

DIN/EN 12600

Glass in building - pendulum tests - impact test method and classification for flat glass

ICC ES AC15

Concrete floor, roof and wall systems and concrete masonry wall systems (test methods referenced in sections 3.0 and 4.0)

ICC ES AC16

Plastic glazed skylights (test methods referenced in sections A3.0 and A4.0, except A4.2 and A4.3)

ICC ES AC174

Deck board span ratings and guardrail systems (guards and handrails) (sections 3.0 (except sections 3.9 and 3.10) and 4.0) Windows and doors subject to wind-borne debris (test methods referenced in sections A3.0 and A4.0, except A4.2 and A4.3)

ICC ES AC245

NFRC 400

Procedure for determining fenestration product air leakage

TAS 201

Impact test procedures

TAS 202

Criteria for testing impact and non-impact resistant building envelope components using uniform static air pressure

TAS 203

Criteria for testing products subject to cyclic wind pressure loading

UBC 24-2

Safety glazing

UL 746C

Standard for polymeric materials - use in electrical equipment evaluations (paragraph 58 only)

Thermal

AAMA 1503

Voluntary test method for thermal transmittance and condensation resistance of windows, doors and glazed wall sections.

ASHRAE 74-1998

Method of measuring solar-optical properties of materials

ASTM C236

Standard test method for steady-state thermal

TL-264

Page 5 of 6

Architectural Testing, Inc.

Made with FlippingBook flipbook maker